Indoor Safety Shower and Eyewash
AS4775:2007 and ANSI compliant emergency safety shower and eyewash is suitable for use in any area not exposed to direct sunlight or subject to freezing.
Pipework, fittings and valves are full stainless steel. All units come with signage.
The pictured foot operation pedal and eyewash bowl/drainpipe are not required for compliance and are available as optional extras.
- Reviews (0)
- Materials Of Construction
This compliant Indoor Safety Shower and Eyewash delivers the AS4775:2007 required 76 litres per minute of flushing fluid from the shower and 12 litres per minute from the eye/face wash.
This indoor safety shower and eyewash does not include the pictured eyewash bowl or foot operation pedal. The non-essential components are available as optional extras.
|Dimensions||1100 × 350 × 350 mm|
Only logged in customers who have purchased this product may leave a review.
|MATERIALS OF CONSTRUCTION|
|PIPEWORK AND FITTINGS||304L stainless steel with 150lb medium wall tubulars and fittings|
|OPERATING VALVES||316 stainless steel 2 piece stay open valve|
|SHOWER SPRAY OUTLET||Nylon 6 nozzle|
|EYE/FACEWASH BOWL||304L stainless steel (OPTIONAL)|
|EYE WASH DIFFUSERS||Chrome plated brass with stainless steel mesh|
|STANDARD FINISH||Brushed finish|
|WATER INLET||1¼” female BSP|
|DESIGN OPERATING PRESSURE||2.0 to 6 BAR G (28 to 87 PSI)|
|TEST PRESSURE||10.3 BAR G (149 PSI)|
|MINIMUM FLOW AT OPERATING PRESSURE||Shower: 76 litres/minute Eye/facewash: 12 litres/minute|
|WEIGHTS AND DIMENSIONS|
|ASSEMBLED DIMENSIONS||360mm X 840mm X 2100mm|